Axis Communications Security Camera 209FD-R User Manual

0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera 209FD-R gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 46
 
26
AXIS 209FD/FD-R/FD-R M12
A self-signed certificate can be used until a Certificate Authority-issued certificate has been obtained. Click
the Create self-signed Certificate button to install a self-signed certificate. Although self-signed certificates
are free and offer some protection, true security will only be implemented after the installation of a signed
certificate issued by a certificate authority.
A signed certificate can be obtained from an issuing
Certificate Authority by clicking the Create Certificate
Request button. When the signed certificate is returned, click the Install signed certificate button to import
the certificate. The properties of any certificate request currently resident in the camera or installed can also
be viewed by clicking the Properties... button. The HTTPS Connection Policy must also be set in the
drop-down lists to enable HTTPS in the camera. For more information, please refer to the online help.
Date & Time
Current Server Time - Displays the current date and time (24h clock). The time can be displayed in 12h
clock format in the Overlay (see below).
New Server Time
- Select your time zone from the drop-down list. If you want the server clock to
automatically adjust for daylight savings time, select the Automatically adjust for daylight saving time
changes.
From the Time Mode
section, select the preferred method for setting the time:
• Synchronize with computer time - sets the time
from the clock on your computer.
• Synchronize with NTP Server - the camera will obtain the time from an NTP server every 60
minutes.
• Set manually - this option allows you to manually set the time and date.
Note:
If using a host name for the NTP server, a DNS server must be configured under TCP/IP settings.
See Basic TCP/IP Settings below.
Date & Time Format Used in Images - Specify the formats for the date and time (12h or 24h) displayed in
the video streams.
Use the predefined formats or use your own custom
date and time formats. See Advanced File Naming &
Date/Time Formats in the online help for information on how to create your own file formats.
Network
Basic TCP/IP Settings
IP Address Configuration
The AXIS 209FD/FD-R/FD-R M12 supports both
IP version 4 and IP version 6. Both versions may be
enabled simultaneously, and at least one version must always be enabled.
When using IPv4, the IP address for the
camera can be set automatically via DHCP, or a static IP address
can be set manually.
If IPv6 is enabled, the AXIS 209FD/FD-R/FD-R M12 will receive an
IP address according to the
configuration in the network router.
There are also options for setting up notification of changes in the IP address,
and for using the AXIS
Internet Dynamic System. For more information on setting the IP address, please see the online help.
Notes:
• DHCP is a protocol for automatic IP address assignment on a network. IP address assignment via DHCP may lead to the situation
where the IP address changes and you lose contact with the camera. Configure the options for notification of IP address change
(under Services) to receive notification from the camera when the IP address changes.
• Alternatively, if your DHCP server can update a DNS server, you can access the AXIS 209FD/FD-R/FD-R M12 by host name which is
always the same, regardless of the IP address.

   Find Your Products By Category