0

Out of 0 Ratings

Owner's of the Premier Mounts TV Mount Clevis Mount gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 22
 
AST-2446/2 Suspension Adapter
Installation Instructions Page 1
AST-2446/2 INSTALLATION INSTRUCTIONS
1. Separate the upper pipe and lower tube. Install the upper pipe to the ceiling structure using commercial
standards and commercially available suitable hardware (Figure 1).
2. Once the upper pipe has been properly secured to the ceiling structure. Screw the base box or any
ceiling adapters to the lower portion of the AST-2446 and secure it with the jam nut (supplied). Slide
the lower tube to the secured pipe, adjust the desired height and lock with the two (2) height adjustable
locking pins. Then screw in the three (3) thumbscrews to stabilize the pipes (Figure 2).
3. Install the mounting bracket into the projector (according to the mounting kit instructions) and raise
the projector to slide through the slot openings from the bracket into the base box. (Refer to the
mounting kit installations). Check all hardware for proper tightness and security).
4. The upper pipe has a duplicate set of thru holes. This allows you to change the normal 24" to 46"
adjustable range to 12" to 24" (Figure 3).
5. Adjustable range with a simple cut of the adapter. We recommend cutting 5/8" from the center of the
first hole of the second set of thru holes on the upper pipe. Cut between the 8
th
and 9
th
hole from the
mounting plate (Figure 3).
WARNING: The wall/ceiling should be capable of supporting a weight of at least five (5) times the plasma
displays. If not, the ceiling must be reinforced. Proper installation procedure by qualified
personnel as outlined in the installation instructions must be adhered to. Failure to do so
could result in serious personal injury.
Figure 1.