Axis Communications Security Camera 209MFD User Manual

0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera 209MFD gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 50
 
31
AXIS 209MFD/MFD-R/MFD-R M12
Use NAT traversal when your AXIS 209MFD/MFD-R/MFD-R M12 is located on an intranet (LAN) and you
wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly
configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to the camera.
Notes:
• For NAT traversal to work, this must also be supported by the broadband router.
• The broadband router has many different names: “NAT router”, “Network router“, Internet Gateway”, “Broadband sharing device”
or “Home firewall” but the essential purpose of the device is the same.
Enable/Disable - When enabled, the AXIS 209MFD/MFD-R/MFD-R M12 will attempt to configure port
mapping in a NAT router on your network, using UPnP™. Note that UPnP™ must be enabled in the camera
(see System Options > Network > UPnP).
Use manually selected NAT router
- Select this option to manually select a NAT router and enter the IP
address for the router in the field provided.
If a router is not manually specified, the AXIS 209MFD/MFD-R/MFD-R M12 will automaticall
y search for
NAT routers on your network. If more than one router is found, the default router will be selected.
Alternative HTTP port
- Select this option to manually define an external HTTP port. Enter the port number
in the field provided. If no port is entered here a port number will automatically be selected when NAT
traversal is enabled.
Notes:
• An alternative HTTP port can be used/be active even if NAT traversal is disabled. This is useful if e.g. your NAT router does not
support UPnP and you need to manually configure port forwarding in the NAT router.
• If you attempt to manually enter a port that is already in use, another available port will automatically be selected.
• When the port is selected automatically it will be displayed in this field. This can be changed by entering a new port number and
clicking Save.
FTP
The FTP server running in the AXIS 209MFD/MFD-R/MFD-R
M12 enables the upload of e.g. new firmware,
user applications, etc. Check the box to enable the service.
RTSP
The RTSP protocol allows a connecting clie
nt to start an MPEG-4 stream. Check the box to enable the server
and enter the RTSP port number to use. The default setting is 554. Note that MPEG-4 video streams will not
be available if this service is not enabled.
Network Traffic
Connection Type - The
default setting is Auto-negotiate, which means that the correct speed is
automatically selected. If necessary, you can set the connection speed by selecting it from the drop-down
list.
Maximum bandwidth - To minimize the impact on other services runnin
g on your network, it is possible to
configure the maximum network bandwidth the product will be allowed to use. Specify the maximum
bandwidth (in Mbit/s or kbit/s) allowed, or set to Unlimited.
SOCKS
SOCKS is a networking proxy protocol. The AXIS 209MFD/MFD-R/MFD-R M1
2 can be configured to use a
SOCKS server to reach networks on the other side of a firewall/proxy server. This functionality is useful if
the camera is located on a local network behind a firewall, but notifications, uploads, alarms, need to be
sent to a destination outside the local network (for example, to the Internet).
LAN (intranet)
WAN (internet)
Broadband
(NAT)
router
ISP

   Find Your Products By Category