0

Out of 0 Ratings

Owner's of the 3Com Gas Grill SMART Mobile Stand for Interactive Displays gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 104
 
20 | MODEL FSSBID 100: CONNECTING DEVICES INSIDE YOUR SMART MOBILE
STAND’S CABINET
99-00962-20 REV C0
7. Connect cable AV03 as follows:
Connect the RGB red video plug to the appropriate red RCA receptacle
on your flat-panel display’s connection panel. This receptacle is typically
labeled Pr or R.
IMPORTANT
Do not confuse the RGB red video plug with the red audio plug.
Connect the RGB green video plug to the green RCA receptacle on your
flat-panel display’s connection panel. This receptacle is typically labeled
Pb or B.
Connect the RGB blue video plug to the blue RCA receptacle on your
flat-panel display’s connection panel. This receptacle is typically labeled
Y or G.
Connect the red audio plug to the remaining red RCA receptacle on your
flat-panel display’s connection panel. This receptacle is typically
labeled R.
Connect the white audio plug to the remaining white RCA receptacle on your
flat-panel display’s connection panel. This receptacle is typically labeled L.
8. Connect your SMART Mobile Stand’s prewired power cable to your flat-panel
display’s power receptacle.
9. Connect the other end of this cable to an available receptacle on your
SMART Mobile Stand’s power bar.
IMPORTANT
Your flat-panel display won’t look exactly like the one shown on page 18.
Some flat-panel displays require audio/video adapters, which you can
purchase from your authorized SMART reseller
.
If you intend to install a Blu-ray player, you can purchase a separate HDMI
cable to replace cable AV03. Install this HDMI cable along the same path
as cable AV03, and then connect it to similar points.
NOTE
Don’t connect your SMART Mobile Stand to a power outlet before you install
the rear access panels (page 58).