5.0

Out of 1 Ratings

Owner's of the 3D Connexion Sewing Machine 7318 gave it a score of 5.0 out of 5. Here's how the scores stacked up:
  • Reliability

    5.0 out of 5
  • Durability

    5.0 out of 5
  • Maintenance

    5.0 out of 5
  • Performance

    5.0 out of 5
  • Ease of Use

    5.0 out of 5
of 37
 
30
q
w
e
q
w
e
r
t
q
w
e
r
t
Pin Tucking
Machine setting
q Stitch pattern: A
w Stitch width: 0 or 5
e Stitch length: 1.5 – 3
r Thread tension: 2 – 6
t Presser foot: Blind hemming foot G
Fold a fabric wrong side together and Lower the
needle into the fabric 0.1 – 0.2 cm inside the
folded edge.
Lower the foot and turn the screw to align the
guide on the foot with the folded edge.
Sew slowly while guiding the folded edge along
the guide.
Open the fabric and iron press the tucks.
q Screw
w Guide
e Folded edge
Shell Tucking
Machine setting
q Stitch pattern: G
w Stitch width: 5
e Stitch length: 2 – 3
r Thread tension: 6 – 8
t Presser foot: Zigzag foot A
Use a lightweight fabric (tricot, for example).
Fold and stitch on the bias.
When the needle swings to the right, allow the
needle to just clear the folded edge of the fabric.
After stitching, open the fabric and iron press the
tucks flat to one side.
NOTE:
Increase the needle thread tension to form
prominent tucks.