PolyScience Food Saver VSCR-200AC1B User Manual

0

Out of 0 Ratings

Owner's of the PolyScience Food Saver VSCR-200AC1B gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 24
 
7 PolyScience Vacuum Sealing Systems
CONTROLLER OVERVIEW
On/Off - Turns power to the Vacuum Sealer On and Off. When
power is On:
• The LED above the button lights
• The digital display shows the last selected seal time
• All other buttons are functional
While the unit is operating, the On/Off button also immediately
stops any process that is in progress when pressed (but does not
turn electrical power to the unit Off).
Marinate - This button is used in conjunction with the external
vacuum hose. Pressing it activates an automated marinating
cycle that alternates between vacuum and hold steps. The LED
above this button is lit while this process is running. There are
two Marinate modes: Normal Mode (which takes approximately
15 minutes) and Extended Mode (which takes approximately 27
minutes).
Normal Mode: Press the button once and release. The number 1 appears
onthedisplayandthentherstvacuum/holdcyclecanbegin.Oncethree
vacuum/hold cycles have been performed, a two second audible tone
sounds to indicate that the process is complete.
Extended Mode: Press and release the button a second time. The number
2appearsonthedisplayandthentherstvacuum/holdcyclecanbegin.
Once three vacuum/hold cycles have been performed, a two second
audible tone sounds to indicate that the process is complete.
Option - This button is used in conjunction with the external
vacuum hose. Pressing it activates a vacuum cycle that runs until
the process is complete. The LED above this button is lit while
this process is running. A two second audible tone sounds when
the process is complete.

   Find Your Products By Category